In BRec, I am getting an error which says “Access to .\log\BRec …was denied”. What is the problem?

BRec,Uncategorized — Administrator @ 5:48 pm

BRec writes an operations log every time it runs.  In order to write the log, the BRec image must have read/write access to the folder BRec is run from.  Usually, running BRec in administrator mode will clear the error message.   If using a shortcut, this option is found in the properties of the shortcut.

Where can I view tutorial video on the BRec Application

BRec — Administrator @ 4:58 pm

BRec Tutorial video may be found here:


How do I perform offline muxing and create proxy files in BRec using a MerlinIP card?

BRec,MerlinIP — Administrator @ 7:11 pm

The files in this folder, along with the ffmpeg software, will allow offline muxing of BRec created files and subsequent transcoding of the muxed file using ffmpeg.

This capability is invoked in BRec by putting a command string in the BRec post-processing command utility, which is found at the bottom of the proxy/title window under the config menu.  Other changes in the config menu which should be made to use these command files are:

Disable Muxing
Unique Temp Names


Configuration Notes:

To use the files as is with the current folder references, the following folders should be set up on the C: drive:

C:\ffmpeg  (Available on Skymicro Dropbox)

C:\ffmpeg_scripts  (Available on Skymicro Dropbox)

C:\Dropbox (Put the Skymicro_Releases folder from Dropbox under this tree or set Dropbox to sync to C:\)

C:\usr (Available on Skymicro Dropbox – this folder is not required for basic ffmpeg functionality, but necessary to use the ffmpeg provided preset configurations.)


Quickstart Instructions

1. Make BRec configuration changes as described above.

2. Copy folders to C:\ as described above, resulting in:


3. Enable post processing by checking the option box on the BRec config menu Proxy/Title Settings.

4. Paste the contents of


into the command line window for post processing in BRec.

4. Run an encode job to test.  A command window will appear with the procedure running.  Note that there are pause statements in the command files that will need response, but can be removed for deployment.


Call Sequence Summary



Job Flow:

The offline muxer and ffmpeg transcoder command files use a sequence of called programs to simplify maintenance of the batch files.  The calling sequence is:

1. C:\Dropbox\Skymicro_Releases\BRec_Post_Processing\CRecmuxHD_ffmpeg_text_for_brec.txt

- this file contains a command string that should be pasted into the BRec command string entry window on the config menu.  This file contains the following command:

C:\Dropbox\Skymicro_Releases_BRec_Post_Processing\Call_CRecmuxHD_ffmpeg %d%p~%f %d%p%f%e %d%p%f.mp4

See BRec_Post_Processing_Readme.txt for documentation of the above parameter values.

2.  C:\Dropbox\Skymicro_Releases_BRec_Post_Processing\Call_CRecmuxHD_ffmpeg.bat

-This file directly calls the offline muxer program and then calls a command file which in turn calls the ffmpeg program.  ffmpeg is called in this fashion so that the transcode parameters can be modified and tested by editing the called command file using standard %1 %2 filename parameters and tested in a command window.

Call_CRecmuxHD_ffmpeg.bat contains the following contents:

C:\Dropbox\Skymicro_Releases\Brec_Post_Processing_\sleep 2
C:\Dropbox\Skymicro_Releases\Latest_Merlin\Merlin_Distribution\Merlin\CRecMUXHD %1 %2
C:\ffmpeg_scripts\call_ffmpeg_H264_HD.bat %2 %3

The sleep statement is needed to give time to BRec so the program can release the file locks it has on the intermediate files.  The pause statements are for testing and can be removed or commented out as desired.  The program sleep.exe is provided.

3. C:\ffmpeg_scripts\call_ffmpeg_H264_HD.bat

-This program has only one executable statement, which simply calls ffmpeg:

c:\ffmpeg_scripts\ffmpeg-i %1 %2


-This program is the call to ffmpeg.exe. By hardcoding the “mp4″ file type value in CRecmuxHD_ffmpeg_text_for_brec.txt (file 1), the command passed to the ffmpeg transcoder will output a file in the mp4 format.

ffmpeg-i contains the following:

c:\ffmpeg\ffmpeg -i %1 %2

How do I connect reference video into the MerlinIPB card?

BRec,MerlinIP — Administrator @ 10:15 pm

The MerlinIPB card can be used with a full-height and half-height bracket.  When using the full-height bracket, there is an option for adding a bnc connector which will accept an analog genlock signal – blackburst or tri-level.    When using the half-height bracket, there is no room for the bnc connector and the first input can be used for a digital genlock.

In the BRec and Mplay applications, sync parameters and status are available via the genlock screen.  In BRec, this screen is found under the Video menu option; in MPlay it is listed under the Config option.

What Version of Quicktime is Recommended for BRec and Mplay?

BRec,MPlay,Uncategorized — Administrator @ 8:11 pm

As of this posting date, the current version of Quicktime available is 7.7.1 and is supported for both BRec and MplayHD. RC255  There is a copy of the the installer in the Skymicro_Releases Dropbox folder.

This work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 Unported License.
(c) 2022 Skymicro FAQ | powered by WordPress with Barecity